Emlid Reach RS4 Pro all-band RTK GNSS receiver with dual cameras
Emlid

RTK GNSS Receiver, Reach RS4 Pro

The Emlid Reach RS4 Pro is a high-precision all-band RTK GNSS receiver with two Full HD cameras, built on the Reach RS4 platform. AR stakeout overlays design points and lines on the live camera view, and photo-based measurement captures hard-to-reach points on building facades, behind fences or across busy roads without a total station. It tracks GPS, GLONASS, Galileo, BeiDou, QZSS and NavIC on L1, L2, L5 and L6, and works as a base or a rover.

  • 7 mm + 1 ppm RTK precision with a fix in about 5 seconds.
  • Two Full HD cameras for AR stakeout and measurement from photos (3 to 5 cm within 10 m).
  • Tilt compensation for measuring without levelling the pole.
  • Built-in 2 W dual-band radio (LoRa and UHF) and LTE modem.
  • 16 hours as an RTK rover with tilt, IP68 rated, -40 to +65 °C.
Download Brochure
Request Quote
Dimensions 128.6 x 128.6 x 99.3 mm
Weight 943 g
Operating Temperature -40 to +65 °C
Static Precision H: 4 mm + 0.5 ppm, V: 8 mm + 1 ppm
RTK Precision H: 7 mm + 1 ppm, V: 14 mm + 1 ppm
Autonomy 16 hrs as RTK rover with tilt, 22 hrs of logging
Battery Li-Ion 5000 mAh, 7.2 V, 36 Wh
Charging USB Type-C (PD): 5V/3A, 9V/3A, 12V/3A, 15V/3A
Wi-Fi 802.11a/b/g/n
Bluetooth Bluetooth 5.1 (BR/EDR + LE)
Internal Storage 16 GB
  • Design points and lines shown over the live camera view, with dynamic navigation, auto bullseye view, cut and fill indicator and quick point switch.
  • Capture points on facades, behind fences, across roads or water without placing the pole on them. Visual capture accuracy 3 to 5 cm within 10 m.
  • 672 channels tracking GPS, GLONASS, Galileo, BeiDou, QZSS and NavIC on L1/L2/L5/L6 for centimetre precision under canopy.
  • Factory-calibrated tilt compensation with no manual recalibration. Measure without levelling the pole.
  • Built-in LoRa and UHF radios, transmit and receive. UHF works with third-party receivers that support TRIMTALK 450S.
  • Built-in global LTE modem with nano-SIM slot for NTRIP corrections.
  • Magnesium alloy body, IP68 rating, operates from -40 to +65 °C.
  • iOS and Android field app with cloud sync for topographic surveys, stakeout, line and road surveys, cut and fill and as-built checks.
  • Land Surveying
  • Construction Layout
  • Roadworks
  • Utilities
  • Critical Infrastructure
  • Drone Mapping
Quick-release mount for Reach RS 4 pro
Emlid Reach RS4 Pro all-band RTK GNSS receiver with dual cameras

Wish to know more about this product?

Feel free to contact our specialist for expert guidance and personalized recommendations.

Download Brochure
Request Quote