The ABT4640/Metal Laser Height & Stagger Gauge is a folding, robust and lightweight tool for measurement of the height and stagger of overhead catenary wire (OHL).
A key feature of the ABT4640/Metal is the ability for the user to quickly and accurately take measurements from a standing position. This helps both to reduce time on track and minimises user fatigue, by reducing repetitive bending motions.
‘PIE’ Brand RAIL GRADIENT MEASURING LEVEL Model SLG-3(D) for checking rail inclination on slab track and also on sleeper mounted rail. The gauge displays slope in RDSO specified format like 1 in 20 & 1 in 40 and also in degrees. This can be used both on straight track and curves.
‘PIE’ make Trammelling Gauge suitable for Casnub Bogies fitted with Vernier scale. Measuring Range: 1900 mm to 2000 mm, 2100 to 2200 mm & 3000 mm to 3100 mm. Accuracy: ±1.0 mm. Material High Grade Aluminium (6063T6), tube-size 50 mm Sq. Stainless Steel scale with hardened pointer. Supplied in light weight, nicely finished wooden storing & transportation box.
‘PIE’ make Digital Switch Rail Vertical Wear Measuring Gauge Model PSWG-1 used to measure switch rail/point rail/check rail reduction relative to the basic rail and the point rail reduction relative to the wing rail. The gauge is supplied in carrying case with zero setting device.
Rail temperature measuring device Model RailTemp GSM/SMS with GSM based data forwarding unit. The continuous rail temperature measurement is important by monitoring of the CWR rail tracks. The RailTemp GSM rail temperature measuring device consists of a temperature gauge (which can be fixed on the rail by screws) and central unit which can be found maximum 10 meter from the temperature gauge.
The device has its own phone number that can be dialled by 6 pre-set phone numbers and then the device will send in answer SMS the actual rail temperature data.
‘PIE’ brand Multipurpose Wheel Wear Gauge/qR Gauge our Model WWMG-V fitted with magnet for easy mounting on flange. Made of stainless steel with Least Count of 0.1 mm. Suitable for measuring flange thickness, flange height and value of qR of flange with following measuring ranges.
Flange Thickness ‘Sd’ 20 mm to 50 mm
Flange Height ‘Sh’ 20 mm to 50 mm
Flange qR Value – 0 to 20 mm.
The Gauge is supplied in well finished case. The measuring point is 70 mm from back of flange.
‘PIE’ make Electronic Track and Turnout Gauge Model AL-6 (E) for Broad Gauge (1676 mm) are made of extruded aluminium section, capable of measuring Track Gauge, Super Elevation (Cant), Check Rail Gauge, Back to Back Distance & Flange way Clearance precisely by means of an easy to read digital Display system and supplied in a padded carrying bag.
Special features of the gauge: –
The gauge has an inbuilt memory to save up to 50 measurements.
The Display can be rotated through 180º for case in use from both sides of the gauge.
‘PIE’ brand Digital Corrosion Measuring Gauge Model PCMG-2is used for measuring the depth of cavity developed due to corrosion of rails.The reading is displayed directly on LCD display and is provided with hardened steel pointer.
Measuring Accuracy: ± 0.01 MM.
Measuring Depth of small groove and hole.
Measuring reference base: 65 MM X 7 MM
Buttons: On/Off, set, mm/inch, present (+, -)
Automatic power off, move the digital unit to turn on power.
Data Output (Optional)
NOTE: –THE GAUGE WILL BE SUPPLIED WITH ‘PIE’ CALIBRATION CERTIFICATE TRACEABLE TO NATIONAL STANDARD/NPL STANDARD NOT OF ANY OTHER AGENCY. OUR MASTERS ARE CALIBRATED BY NABL APPROVED LABS.
‘PIE’ brand Portable Track Gauge Calibration Bench made of steel extruded tubing provided with hardened steel testing fixtures set at defined track gauge useful for onsite checking and calibration of Track Gauges Calibrated for Broad Gauge 1676 mm/Standard Gauge 1435 mm (as per user requirement).
The Track Gauge is supplied complete in transportation and storing box with working manual and Recalibration device.