Multipurpose Wheel Wear Measuring Gauge/qR Gauge Model WWMG-V

‘PIE’ brand Multipurpose Wheel Wear Gauge/qR Gauge our Model WWMG-V fitted with magnet for easy mounting on flange. Made of stainless steel with Least Count of 0.1 mm. Suitable for measuring flange thickness, flange height and value of qR of flange with following measuring ranges.

  1. Flange Thickness ‘Sd’ 20 mm to 50 mm
  2. Flange Height ‘Sh’ 20 mm to 50 mm
  3. Flange qR Value – 0 to 20 mm.

The Gauge is supplied in well finished case. The measuring point is 70 mm from back of flange.

P8 PROFILE GAUGE

PIE’ Make Adjustable Tyre Gauge for P8 Profile. Model ATG – P8 complete in case.

Technical Specifications:

Max Allowed Flange Wear               : 9 mm

Max Allowed Tread Hollow             : 6.5 mm

Accuracy of gauge                             : 0.5 mm

DIGITAL WHEEL WEAR GAUGE MODEL WWG-1 (D)

‘PIE’ make Digital Wheel Wear Gauge Model WWG-1 (D) for B.G. Locos, capable of measuring main wheel wear parameters with a resolution of 0.1 mm. The gauge features an OLED display for easy viewing in pits and has an in-built memory for 50 readings. The gauge is functionally as per RDSO SKDL 3592. The gauge is supplied in a padded PVC box with battery charger.

Gauge is supplied with calibration checking template calibrated from NABL approved laboratory.

Technical Specifications:

Parameters Measured Digitally Flange Wear, Root Wear, Tread Wear
Parameters Measured MechanicallyTyre Thickness, Wheel Diameter, Flat Tyr
Least Count of Digital Parameters0.1 mm
Accuracy of Digital Parameters+/- 0.1 mm
Accuracy of Mechanical Parameters+/- 2 mm
Measurement Range of Flange, Tread and Root Wear11 mm
Display OLED
BatteryRechargeable Li-Ion
Construction of GaugeStainless Steel and Aluminium
Weight of GaugeLess than 1.5 kgs

qR Gauge Model WFMG-V

‘PIE’ brand Multipurpose Wheel Wear Gauge/qR Gauge our Model WFMG-V fitted with magnet for easy mounting on flange. Made of stainless steel with Least Count of 0.1 mm. Suitable for measuring flange thickness, flange height and value of qR of flange with following measuring ranges:

  1. Flange Thickness ‘Sd’ 20 mm to 50 mm
  2. Flange Height ‘Sh’ 20 mm to 50 mm
  3. Flange qR Value – 0 to 20 mm.

The Gauge is supplied in well finished case. The measuring point is 70 mm from back of flange.

DIGITAL FLANGE WEAR GAUGE MODEL FWG-2 (D)

‘PIE’ brand Digital Flange Wear Gauge of robust and water resistant (IP 67) design, main frame made from hardened and ground stainless steel hardened measuring pointers. Make ‘PIE’ model FWG-2 (D).

Technical Specifications:

Measuring Range0 mm to 50 mm/ 0 to 2.0 Inch
Least Count0.01 mm/ 0.0001 Inch
SensorInductive Sensor
Accuracy+/-0.02 mm
Measuring Lug/Pointer Hardness 45 to 50 HRC
Environmental Protection  IP 67 (IEC 60529) protected against water, dust, lubricants etc.
Operating Temperature 5ºC to 42ºC
Storage Temperature– 5ºC to +50ºC
Auto – Suitable OFF FacilityYes available

The gauge is supplied in padded ABS case along with calibration certificate with traceability to NPL standards.

DIGITAL FLANGE WEAR GAUGE MODEL FWG-1 (D)

‘PIE’ Brand Digital Flange Wear Gauge Model FWG-1 (D) for BG Electric Loco with Accuracy ±0.01 mm with Calibration Certificate. 

Technical Specifications:

  1. Resolution: 0.01mm.
  2. Power: One 1.5V button cell.
  3. Measuring Speed: less than 1.5 m/s.
  4. Working Temperature: 0 to 45 degree C.
  5. Relative Humidity: less than 80 percent.
  6. Storage Temperature: – 10 to 60 degree C.
  7. Zero setting at any position, easy to take relative measurements.
  8. Metric / inch system interchange at any position.
  9. Conversion between relative and absolute measurement and tolerance zone setting.
  10. Suitable for measuring Flange Wear and Flange Thickness

FLANGE WEAR GAUGE MODEL FWG-1 (SKDL-4445)

PIE’ Brand Flange wear gauge Model FWG-1– Precisely made Flange wear gauge (B.G) for thick profile as per RDSO Drawing no. SKDL–4445 made of hardened steel complete in case. The gauge measures Flange wear of wheel.

DIGITAL ROOT WEAR GAUGE MODEL RWG-2 (D)

PIE’ brand Digital Root Wear Gauge of robust and water resistant (IP 67) design, main frame made from hardened and ground stainless steel hardened measuring pointers. Make ‘PIE’ model RWG-2 (D).

Technical Specification: –

Measuring Range   0 mm to 50 mm/ 0 to 2.0 Inch
Least Count0.01 mm/ 0.0001 Inch
SensorInductive Sensor
Accuracy  /-+ 0.02 mm
Measuring Lug/Pointer Hardness 45 to 50 HRC
Environmental Protection IP 67 (IEC 60529) protected against water, dust, lubricants etc.
Operating Temperature  5ºC to 42ºC
Storage Temperature – 5ºC to +50ºC
Auto – Suitable OFF FacilityYes available

The gauge is supplied in padded ABS case along with calibration certificate with traceability to NPL standards.

DIGITAL ROOT WEAR GAUGE MODEL RWG-1 (D)

‘PIE’ Brand Digital Root Wear Gauge for BG Electric Loco Model RWG-1 (D) with Accuracy ±0.01 mm with Calibration Certificate.

Technical Specification: –

  1. Resolution: 0.01mm.
  2. Power: One 1.5V button cell.
  3. Measuring Speed: less than 1.5 m/s.
  4. Working Temperature: 0 to 45 degree C.
  5. Relative Humidity: less than 80 percent.
  6. Storage Temperature: – 10 to 60 degree C.
  7. Zero setting at any position, easy to take relative measurements.
  8. Metric / inch system interchange at any position.
  9. Conversion between relative and absolute measurement and tolerance zone setting.
  10. Suitable for measuring Root Wear and Root Thickness.

ROOT WEAR GAUGE MODEL RWG-1 (SKDL-4444)

‘PIE’ Brand Root wear gauge Model RWG-1 – Precisely made Root wear gauge (B.G) for thick profile as per RDSO Drawing no .SKDL–4444 made of hardened steel complete in case. The gauge measures Root wear of wheel.