Railway Measurement

‘PIE’ Brand Buffer Projection Gauge, Model BPG-1 the gauge gives automatically the projection of buffers within ±1.0 mm accuracy, Range – 570 mm to 665 mm Supplied in elegantly finished well padded wooden storing and transportation box.

‘PIE’ brand Digital Buffer Height Gauge, Model BHG-3 (CBC) – E the gauge consists of a foldable track base and a vertical column fitted with a pointer. This column has a verticality bubble and is foldable for compactness.

Special Features: –

1. Height readings are displayed on a Digital display
2. Accuracy of gauge is ± 0.2mm
3. Measuring range 930 to 1130mm
4. Supplied in elegantly finished carrying case/bag.

‘PIE’ Brand Buffer Height Gauge, Model BHG‑3 (CBC) model consists of foldable track base and vertical column with a measuring scale & pointer. This column has a verticality bubble and is foldable for compactness and ease in storing and transportation.

Special Features: –

1. Measuring Range 900 to 1140 mm.
2. Accuracy of gauge is ±1.0 mm
3. Supplied in elegantly finished storing & transportation box with carrying handle.

‘PIE’ Brand Buffer Height Gauge, Model  BHG‑1 (O). This model is used for measurement of side buffers height. The instrument is clamped on the rails and heights of two buffers are measured separately. The measuring unit fitted at the offset to cover the difference of horizontal distance between the rail & the buffer. Accuracy of gauge is ± 1.0 mm. Supplied in elegantly finished storing & transportation box with carrying handle. Measuring Range 900 to 1140 mm.

‘PIE’ make Set of 06 gauges for checking of AAR ‘H’ type Center Buffer Coupler of LHB Coaches. All gauges are made of hard stainless steel and hardness 50 HRC. Supplied in carrying bag.

01 Set consisting of followings gauges: –

1. ‘PIE’ make Contour Maintenance Gauge. (Knuckle Profile Gauge) for checking CBC-“H”- type coupler (APTA Drawing/ Gauge No.-31000).
2. ‘PIE’ make Aligning Wing Limit Gauge for checking CBC-“H” Type coupler (APTA Drawing/ Gauge No.-32600).
3. ‘PIE’ make Contour Condemning Limit Gauge (Jaw- Gap Gauge) for checking CBC- “H” Type coupler (APTA Drawing/ Gauge No.-34100-1).
4. ‘PIE’ make Knuckle Nose Wear and Stretch Limit Gauge for checking CBC-“H”- Type coupler (APTA Drawing/ Gauge No.-34100-2A).
5. ‘PIE’ make Vertical Height Aligning Wing Pocket & Guard Arm Gauge (GO GAUGE-Must-Pass) for checking CBC-“H”- Type coupler (APTA Drawing/ Gauge No.-34101-4).
6. ‘PIE’ make Vertical Height Condemning Limit Aligning Wing Pocket & Guard Arm Gauge (NO-GO GAUGE must not pass) for checking CBC-“H” Type coupler (APTA Drawing/ Gauge No.-44250-5).

THE GAUGES QUOTED ABOVE WILL BE SUPPLIED WITH ‘PIE’ CALIBRATION CERTIFICATE TRACEABLE TO NATIONAL STANDARD/NPL STANDARD NOT OF ANY OTHER AGENCY. OUR MASTERS ARE CALIBRATED BY NABL APPROVED LABS.