Railway Measurement

‘PIE’ Brand Digital Flange Wear Gauge Model FWG-1 (D) for BG Electric Loco with Accuracy ±0.01 mm with Calibration Certificate. 

Technical Specifications:

1. Resolution: 0.01mm.
2. Power: One 1.5V button cell.
3. Measuring Speed: less than 1.5 m/s.
4. Working Temperature: 0 to 45 degree C.
5. Relative Humidity: less than 80 percent.
6. Storage Temperature: – 10 to 60 degree C.
7. Zero setting at any position, easy to take relative measurements.
8. Metric / inch system interchange at any position.
9. Conversion between relative and absolute measurement and tolerance zone setting.
10. Suitable for measuring Flange Wear and Flange Thickness

‘PIE’ Brand Flange wear gauge Model FWG-1– Precisely made Flange wear gauge (B.G) for thick profile as per RDSO Drawing no. SKDL–4445 made of hardened steel complete in case. The gauge measures Flange wear of wheel.

‘PIE’ Brand Digital Root Wear Gauge for BG Electric Loco Model RWG-1 (D) with Accuracy ±0.01 mm with Calibration Certificate.

Technical Specification: –

1. Resolution: 0.01mm.
2. Power: One 1.5V button cell.
3. Measuring Speed: less than 1.5 m/s.
4. Working Temperature: 0 to 45 degree C.
5. Relative Humidity: less than 80 percent.
6. Storage Temperature: – 10 to 60 degree C.
7. Zero setting at any position, easy to take relative measurements.
8. Metric / inch system interchange at any position.
9. Conversion between relative and absolute measurement and tolerance zone setting.
10. Suitable for measuring Root Wear and Root Thickness.

‘PIE’ Brand Root wear gauge Model RWG-1 – Precisely made Root wear gauge (B.G) for thick profile as per RDSO Drawing no .SKDL–4444 made of hardened steel complete in case. The gauge measures Root wear of wheel.

‘PIE’ Brand Pocket Size Mini Tyre Defect Gauge (Model-MTDG-1) is made of 3 mm thick hardened steel plate used to measure the following: –

1. Excessive worn Tread or deep flange
2. Radius at the root of wheels too small.
3. Thin flange
4. Sharp flange
5. Flat tyre

We have two models of Pocket Size Mini Tyre Defect Gauge: –

1. For B.G wheels 2. For M.G wheels

SPECIFICATIONS: –

Weight	135 gm (Approx without cover)
Material	Hardened steel 3mm thick
Dimensional tolerance	within 0.05 mm
Case	Cordura with belt holster

NOTE: .

While placing order please specify the following without this information supply will be delayed: –

1. Condemning thickness required 22 mm or 16 mm.
2. Two models are available one for High speed wheels & other for Low speed wheels, please specify while ordering. If nothing is specified model available will be supplied.

‘PIE’ Brand Tyre Defect Gauge/Condemning Gauge Model TDG-1 as per Plate 38 Rule 2.8.4 of IRCA made of 3mm thick  hard alloy steel plate, used for inspection of the following: –

1. CONDEMN FLANGE THICKNESS
2. ROOT RADIUS
3. SHARP FLANGE
4. DEEP FLANGE
5. FLATNESS OF TREAD

We have TWO Models of Tyre Defect Gauge: –

1. For B.G wheels 2. For M.G wheels

NOTE: .

While placing order please specify the following without this information supply will be delayed: –

1. Condemning thickness required 22 mm or 16 mm.
2. Flat face required 50 mm or 60 mm.
3. It is supplied in carrying case.
4. Approx. weight 300 gm

Digital Tread Wear Gauge of robust and water resistant (IP 67) design, main frame made from hardened and ground stainless steel, hardened measuring pointers. Make ‘PIE’ Model TG-1 (D). The gauge is capable of measuring the tread wear of BG wheels.

MAIN SPECIFICATIONS: –

Measuring Range	0 mm to 25 mm
Least count	0.01 mm / 0.0001 Inch
Sensor	Inductive Sensor
Accuracy	+/- 0.02 mm
Measuring Lug/Pointer Hardness	45 to 50 HRC
Environmental Protection	IP 67 (IEC60529) Protected against water, dust. lubricants etc.
Operating Temperature	5ºC to 42ºC
Storage Temperature	– 5ºC to +50ºC
Auto – Suitable OFF Facility	Yes available

NOTE: .

1. The gauge supplied with Calibration Certificate traceable to NPL standards.
2. The gauge is supplied in well-padded case.

‘PIE’ Brand Tread Wear Measuring Gauge Model TWG-1 to solid wheel EMU’s for Tyred wheels, made of hard alloy steel with hardened measuring pointers and used to measure followings–

1. FLANGE WEAR
2. ROOT WEAR
3. TREAD WEAR
4. FLAT TYRE
5. WHEEL PROFILE

NOTE: .

1. The gauge supplied with Calibration Certificate.
2. The gauge is supplied in well-padded case.

‘PIE’ Brand Tread Wear Measuring Gauge Model TWG-1 (C&W) for carriage and wagon, made of alloy steel with hardened measuring pointers and used to measure followings: –

1. FLANGE THICKNESS
2. ROOT THICKNESS
3. TREAD WEAR
4. FLAT TYRE
5. CONDEMNING ROOT RADIUS
6. SHARP FLANGE

NOTE: .

1. Net weight 600gm
2. The gauge supplied with Calibration Certificate.
3. The gauge is supplied in well-padded case.

‘PIE’ Brand Tread wear measuring gauge Model TWG-1 (BG Loco) for thick/wear adopted profile combined for B.G. Locos, made of alloy steel with hardened measuring pointers and used to measure followings: –

1. FLANGE WEAR
2. ROOT WEAR
3. TREAD WEAR
4. TYRE THICKNESS
5. WHEEL DIA (ACCURACY +/- 2mm)
6. FLAT TYRE

NOTE:

1. The gauge functionally conforms to RDSO Drg. No. SKDL 3592 ALT-6.

2. The gauge is supplied in well-padded case.