Railway Measurement

‘PIE’ Brand Digital Flange Wear Gauge Model FWG-1 (D) for BG Electric Loco with Accuracy ±0.01 mm with Calibration Certificate. 

Technical Specifications:

1. Resolution: 0.01mm.
2. Power: One 1.5V button cell.
3. Measuring Speed: less than 1.5 m/s.
4. Working Temperature: 0 to 45 degree C.
5. Relative Humidity: less than 80 percent.
6. Storage Temperature: – 10 to 60 degree C.
7. Zero setting at any position, easy to take relative measurements.
8. Metric / inch system interchange at any position.
9. Conversion between relative and absolute measurement and tolerance zone setting.
10. Suitable for measuring Flange Wear and Flange Thickness

‘PIE’ Brand Flange wear gauge Model FWG-1– Precisely made Flange wear gauge (B.G) for thick profile as per RDSO Drawing no. SKDL–4445 made of hardened steel complete in case. The gauge measures Flange wear of wheel.

‘PIE’ Brand Digital Root Wear Gauge for BG Electric Loco Model RWG-1 (D) with Accuracy ±0.01 mm with Calibration Certificate.

Technical Specification: –

1. Resolution: 0.01mm.
2. Power: One 1.5V button cell.
3. Measuring Speed: less than 1.5 m/s.
4. Working Temperature: 0 to 45 degree C.
5. Relative Humidity: less than 80 percent.
6. Storage Temperature: – 10 to 60 degree C.
7. Zero setting at any position, easy to take relative measurements.
8. Metric / inch system interchange at any position.
9. Conversion between relative and absolute measurement and tolerance zone setting.
10. Suitable for measuring Root Wear and Root Thickness.

‘PIE’ Brand Root wear gauge Model RWG-1 – Precisely made Root wear gauge (B.G) for thick profile as per RDSO Drawing no .SKDL–4444 made of hardened steel complete in case. The gauge measures Root wear of wheel.

‘PIE’ Brand Pocket Size Mini Tyre Defect Gauge (Model-MTDG-1) is made of 3 mm thick hardened steel plate used to measure the following: –

1. Excessive worn Tread or deep flange
2. Radius at the root of wheels too small.
3. Thin flange
4. Sharp flange
5. Flat tyre

We have two models of Pocket Size Mini Tyre Defect Gauge: –

1. For B.G wheels 2. For M.G wheels

SPECIFICATIONS: –

Weight	135 gm (Approx without cover)
Material	Hardened steel 3mm thick
Dimensional tolerance	within 0.05 mm
Case	Cordura with belt holster

NOTE: .

While placing order please specify the following without this information supply will be delayed: –

1. Condemning thickness required 22 mm or 16 mm.
2. Two models are available one for High speed wheels & other for Low speed wheels, please specify while ordering. If nothing is specified model available will be supplied.

‘PIE’ Brand Tyre Defect Gauge/Condemning Gauge Model TDG-1 as per Plate 38 Rule 2.8.4 of IRCA made of 3mm thick  hard alloy steel plate, used for inspection of the following: –

1. CONDEMN FLANGE THICKNESS
2. ROOT RADIUS
3. SHARP FLANGE
4. DEEP FLANGE
5. FLATNESS OF TREAD

We have TWO Models of Tyre Defect Gauge: –

1. For B.G wheels 2. For M.G wheels

NOTE: .

While placing order please specify the following without this information supply will be delayed: –

1. Condemning thickness required 22 mm or 16 mm.
2. Flat face required 50 mm or 60 mm.
3. It is supplied in carrying case.
4. Approx. weight 300 gm